Sep
2020

Evaporator Coil Bending – Bended Or Breaking

The evaporating unit coils of an evaporating system can sometimes be bent or broken. These units can be dangerous to touch, especially in older homes or when they aren’t properly maintained. If you notice this problem, it’s probably best to have the evaporating system inspected by a professional. A good technician should know what to look for to determine if the coil is in need of repair. In some cases, the evaporator coil is simply too hard to reach, and should be cleaned properly.

Evaporator coils are usually located near the exterior of the home and are difficult to reach with a standard wrench towing device. This may mean that you have to hire a professional to take care of this issue. Unfortunately, many times the coils themselves are also the first part of the cooling equipment to break down. While a professional will be able to inspect the evaporator coils to determine if they need to be replaced, you’ll likely have to get them repaired on your own. Before you attempt to repair the coils themselves, you’ll need to check for signs of deterioration, and also to see if they are corroded or damaged at all.

As previously mentioned, the coils themselves are often a safety concern. If the coils have been improperly installed, you may have to pay someone to come in and install them for you. Also, in many cases, the evaporating unit itself may be damaged and require replacement. This can be expensive, as well as dangerous. If you’re not sure what damage has been done to the evaporating coils themselves, you should call a professional to come and see what needs to be done. Most professional companies will be able to provide you with a warranty on their work, so you won’t have to worry about repairs and replacements again.

Sep
2020

Furnace Troubleshooting

If you own or rent your home, chances are you’ve heard of furnace troubleshooting before. The furnace can go out on any given day, and even if it doesn’t, if you don’t know how to fix the problem, it could end up costing you more money in the long run. It can get very scary on those cold, winter nights when you have the heat only to find out that it’s gone. Within a few hours, the whole home will be much colder, especially the elderly and young people.

So, what should you do when you are faced with a furnace troubleshooting dilemma? The first thing you should do is turn the power off completely. This way, you won’t need to worry about anything getting damaged in case there is a power failure. The next step would be to check the thermostat. This device can malfunction on its own as well. If it turns itself on, then there might be something wrong with the heating unit itself. If it doesn’t work, then it could mean that there is an underlying problem with the heating system.

The last thing you can do is turn your furnace off and check its temperature. If it is not too cold, but not too hot, then the furnace might be fine and you can turn it back on. However, if it is too cold, then there is a problem with the heating unit. If you have to do any further checking, contact the company that sold you the furnace or go online to the manufacturer’s site for more information. Remember, these are things you can do yourself, but you might as well try to save yourself the time and trouble of a professional.