Jul
2020

Condenser Repair Near Me

There is often some discussion about condenser repair near me. What does it mean? It means that the condenser is a small part of the alternator or engine which is usually installed in the engine compartment. Basically the condenser makes use of either the batteries or the direct current for its output voltage. The condenser is made from aluminum, iron, plastic, polyethylene and other materials.

In any case the condenser is a device which receives the heat from the air, condenses it and pushes it back to the air-conditioning system. This heating method is done by an evaporator coil inside the condenser. But this is not enough to keep the engine running well. For this you also need the cooling fan. These are placed on the underside of the alternator casing. You need to check that it works properly by turning it on.

In any case condenser repair near me should be checked before making any changes to the vehicle. If your alternator needs to be replaced then you can do so in any case. The procedure involves removing the rotor assembly and re-soldering it. But it can be difficult to replace the rotor especially if you have not done it before. Also you should make sure that the replacement rotor is suitable for the particular model of your vehicle. Also you should check the guides provided by the alternator manufacturer to know about how to replace the rotor.

Jul
2020

Understanding Condenser Capacity and GPM Per Ton

The primary function of a condenser is to change the flow of the air which passes through the pipes it is mounted in. A condenser’s main function is to change the path of air flow in a given system. The condition of a system depends on its capacity to collect, hold and transfer a certain volume of air or other liquid. The flow rate of the device determines the output capacity of the system. For example, a high-pressure machine can conduct more air than a low-pressure machine.

There are two types of condensers: flexible and fixed, and these are also available in different sizes and capacities. The flexible type of condenser can be designed in two ways: as one or two flow connections, and usually consists of a permanent position and a removable exhaust condenser element. The second type has only one permanent position and two removable exhaust condensers. The fixed condenser is the most common type of condenser available in the market.

The term “effective GPM” is sometimes used as a synonym for the capacity of a system. A much more appropriate term would be, “GPM per ton”. The true value of the capacity of a system is directly proportional to the actual output of a device, which may be in terms of GPM per ton. In this regard, it is important to note that the throughput rate of a system also determines the GPM per ton.